How to Wash a Dog Bed Without Ruining the Foam
Learn how to wash a dog bed, clean removable covers, protect foam inserts, and dry every layer safely, with a weekly bedding routine that fits real dog life.
Alice loves a long nap, while Dodo loves collecting mud and leaves in her coat. Between my Chow Shepherd and mini Chowdoodle, comfortable resting spots and outdoor dirt both have a place in our house. That makes dog-bed laundry a more useful subject to me than another spray promising to make everything smell like flowers.
To wash a dog bed, check each part’s care label, remove loose fur, clean the washable cover, and dry every layer completely. Keep foam out of the washing machine unless its manufacturer explicitly permits machine washing. A washable cover does not automatically make the cushion underneath washable. 1 2
The CDC recommends cleaning pet beds and blankets weekly, with extra cleaning whenever they look dirty or smell bad. That gives me a sensible baseline, without pretending that Alice’s preferred nap schedule and Dodo’s mud enthusiasm create identical laundry needs. 1
This article contains affiliate links. As an Amazon Associate, I earn from qualifying purchases. I may also earn a commission through my LoveWag link, at no extra cost to you. These are researched suggestions; I have not personally tested every item.
Check the cover, filling, and liner separately
Before choosing a wash cycle, I would unzip the bed and identify its separate pieces. An outer cover, foam mattress, and protective liner can each have different cleaning limits. Even bolsters sometimes come out separately and need their own care instructions. 2
Look for the sewn-in tag first, then the manufacturer’s instructions for your exact model. If the tag is missing, find the product page or ask the manufacturer before soaking the filling. The word “washable” on a shopping page is too vague to settle which pieces can go into a machine. 1 2
| Bed component | What to check before cleaning | What to avoid assuming |
|---|---|---|
| Removable fabric cover | Permitted temperature, wash cycle, and drying method. | Every cover tolerates hot water or high dryer heat. |
| Foam or orthopedic insert | Whether only spot cleaning is permitted. | A removable cover means the foam is machine washable. |
| Stuffed bed without a zipper | Whether the complete bed is approved for machine or hand washing. | No zipper means the whole bed can safely soak. |
| Coated liner or outdoor cover | Whether it must be wiped, hand washed, or machine washed. | A waterproof-looking layer tolerates heat and agitation. |
These distinctions matter in practice. Furhaven specifies cold washing for many indoor covers but wiping for its coated outdoor covers and water-resistant liners. Barker Beds permits cool-water laundering and hang drying for its liners. I would follow the instructions belonging to the bed in front of me. 2 3
How to wash a dog bed with a removable cover
For a bed with a washable cover and a foam insert, I would handle the cover as laundry and inspect the insert separately. Keep the clean and dirty pieces apart while you work, and give your dog another dry resting place. 1 2
1. Remove hair and dry debris before washing
Pick off visible leaves and remove loose fur with a vacuum attachment or fabric hair remover. Work around seams and the underside, where loose debris can hide. Chewy’s cleaning guide recommends this step before laundering to reduce the hair going into the machine. 4
A vacuum or lint roller you already own is enough to start. If you want a reusable option, the ChomChom Roller collects fabric-bound fur in a compartment using short back-and-forth strokes. It does not need adhesive refills or batteries, and it belongs on fabric rather than on your dog. 5 6
I would check any fabric tool on a small area first and avoid pulling at loose threads. There is no reason to buy a new gadget if the vacuum attachment already does the job.
2. Remove the filling and inspect the inside
Take out the foam and any removable bolsters before washing the cover. Check the liner and insert for moisture or stains instead of judging the bed only by its outside. Follow the zipper directions for that model; Furhaven, for example, tells owners to zip its indoor covers closed before washing. 2
Take a quick photo of the arrangement if reassembly looks confusing. That is especially useful when several similar-looking cushions fit inside one cover. Put the filling somewhere clean and away from the dog while the cover is off.
3. Treat stains only with a compatible product
For a marked cover, check whether the fabric permits a pretreatment. A cleaner labeled for pet stains and that particular surface may help with an accident, but follow its application and rinsing instructions. Spot-test first, and keep your dog away while cleaning products are wet. 1 4
I would not combine several cleaners because one stain is stubborn. CDC guidance warns against mixing bleach with other cleaners, including ammonia, because dangerous gases can result. Use one compatible product according to its label rather than improvising a stronger mixture. 1
4. Wash at the temperature the label allows
Choose the cycle and water temperature specified for the fabric. CDC guidance recommends an appropriate laundry cycle and notes that dye-free, fragrance-free detergent may be preferable for pets with sensitive skin. Follow the detergent dose for your machine and load. 1
There is no universal hot-wash rule for dog beds. Furhaven’s indoor-cover instructions and Barker Beds’ cover instructions both specify cold water. High heat can damage some protective backings, so a generic cleaning tip should not override the actual care label. 2 3
If the item fits too tightly to move through the wash properly, use a suitable larger machine or ask a laundry service about its pet-bedding policy. Confirm that the bed itself is washable before choosing a laundromat; a larger drum does not change the material’s limits. 4
5. Dry fully before putting the bed together
Use the labeled drying method, which may mean air drying or a permitted low-heat setting. Furhaven favors line drying for its covers and requires foam to air dry completely. Do not zip a dry-looking cover around a damp insert. 2
Check thick seams and bolsters as well as the flat sleeping surface. Follow your dryer’s instructions for clearing the lint filter, and give the bed more time if any part still feels damp. A second clean cover is useful only when the cushion underneath is also ready to use.
How to clean a memory foam dog bed
Start by keeping the foam dry wherever possible. For foam with spot-clean-only instructions, use the manufacturer-approved method instead of putting it into the washer or soaking it in a tub. Furhaven recommends a damp cloth with diluted detergent for its foam and specifically says not to saturate it. 2
Blot a permitted surface treatment rather than pouring liquid through the cushion. Remove cleaner residue as directed, then allow the foam to air dry completely before covering it. Do not use a tumble dryer, heater, or aggressive squeezing unless the manufacturer expressly allows that method. 2
If urine has soaked deeply into a spot-clean-only insert, ask the manufacturer whether it can be cleaned adequately or needs replacement. I would avoid repeated soaking attempts just to save a cushion that cannot tolerate them. A clean cover can hide a problem in the filling without fixing it.
For the next bed or replacement insert, I would look for a fitted protective liner with clear care instructions. Check exactly what it covers: Barker’s Original liner, for example, protects the mattress portion but does not cover sofa-bed bolsters. Water resistance also does not mean every liquid can sit indefinitely without getting through. 3 7
How to wash a dog bed without a removable cover
A missing zipper changes the first question to whether the complete bed can be washed. Read the whole-bed instructions before choosing a machine or a bathtub. Some stuffed beds permit laundering, while other materials need a more limited cleaning method. 1 4
If the entire bed is machine washable, remove debris, check the seams, and use the specified cycle in an appropriately sized machine. Dry it using the labeled method and inspect the center before returning it to your dog. A bulky bed needs more than a dry outer surface. 4
If the label permits hand washing, follow its instructions for water, detergent, rinsing, and drying. If it permits only surface cleaning, do not submerge it because a general online guide recommends soaking. For a badly soiled bed with no readable instructions, contacting the maker is more sensible than guessing.
How often should you wash your dog’s bed?
I would use weekly cleaning for bedding and blankets as the starting point, following the CDC’s example schedule. Clean sooner when there is visible dirt, a bad smell, or an accident. A bed can need attention before the next planned laundry day. 1
That weekly check includes inspecting the filling, though it does not mean soaking foam every week. A removable washable cover makes the routine easier because its laundry instructions can stay separate from the insert’s cleaning limits. 1 2
| What you find | Practical next step |
|---|---|
| Loose fur or dry leaves between washes | Remove debris and keep the regular bedding-cleaning schedule. |
| A dirty or smelly cover | Clean it sooner using its own care instructions. |
| An accident that reached the filling | Check the insert’s cleaning limits as well as the cover’s. |
| A sick pet or increased household infection risk | Ask the vet about appropriate cleaning and disinfection for the material. |
| Torn seams, exposed filling, or persistent dampness | Keep the bed out of use while you assess repair, cleaning, or replacement. |
Cleaning and disinfecting have different jobs. Cleaning physically removes dirt and germs; disinfecting kills germs and may be needed in particular situations, including illness. If a bed cannot tolerate the required disinfection method, ask your vet about a suitable alternative or replacement. 1
Keep the next load smaller
Dodo’s habit of collecting outdoor debris makes the entryway a useful place to start. Removing mud before a dog reaches their bed is easier to plan around than treating every resting surface afterward. My muddy-paw cleaning guide covers that separate part of the routine.
For an entry area that regularly gets wet, a LoveWag washable mat is an optional floor-protection layer. The brand describes its mats as absorbent, leakproof, and washable. I would choose a suitable size and follow that mat’s own washing instructions. It is separate from a fitted bed liner and does not replace Alice’s supportive resting place. 8
A spare compatible cover can also keep the dog’s usual bed available during laundry, provided the insert stays clean and dry. Before buying one, check the model and dimensions rather than assuming that two beds labeled “large” use matching covers.
I would also check whatever keeps ending up beside the bed. The dog-toy cleaning guide explains how different toy materials need different treatment. There is little appeal in returning a freshly washed blanket to a pile of dirty toys.
Questions about dog-bed laundry
Can I use regular laundry detergent?
Yes, provided it suits the fabric and you follow the detergent and bed instructions. A special pet-branded detergent is not automatically necessary. Dye-free, fragrance-free options may suit sensitive skin better. Follow the bed maker’s advice about avoiding scent beads and scented dryer sheets. 1 2
Will vinegar disinfect the bed?
Do not rely on vinegar as a general disinfectant. The CDC says there is not enough evidence for treating vinegar as a dependable cleaner or disinfectant across pet supplies. Use detergent for cleaning and an appropriate, label-directed disinfection method when needed. Never mix vinegar with bleach. 1
Can I put a dog bed in the dryer?
Only the components whose care instructions permit it. Some fabric covers allow low tumble drying, while liners may require hang drying and foam may need air drying. The instructions for the cover do not automatically apply to the cushion or bolsters. 2 3
What if the bed still smells after washing?
Check whether you cleaned the affected layer and whether every part dried completely. If the odor comes from a deeply soiled insert, repeating a cover wash may not solve it. Ask the maker about cleaning that filling, and replace a component that cannot be cleaned safely. 2 4
Alice’s enthusiasm for long naps gives me a good reason to care about the surface underneath her. I want that spot clean without making the foam unusable in the process. For me, the manageable routine is removing debris, following each component’s instructions, and leaving enough time for everything to dry.
If you are also sorting out where and when your dog rests, my guide to dog sleep needs covers the broader picture. Bedding laundry is one part of making that rest comfortable.
References
- CDC: About Cleaning and Disinfecting Pet Supplies
- Furhaven: How to Wash Your Dog Bed, Cat Bed, and Cover
- Barker Beds: Frequently Asked Questions and Care Instructions
- Chewy: How To Clean Dog Beds
- Amazon: ChomChom Roller Original, ASIN B00BAGTNAQ
- Chewy: ChomChom Roller Instructions
- Barker Beds: Original Bed Waterproof Liner
- LoveWag: Washable Pet Mats and Uses